Expansion Joints

Single Strip seal elastomeric joint (Movement up to 80mm). Single strip expansion joint consist of two edge beams with anchorages and with elastomeric sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system

• Production Capacity: 5000
• Delivery Time: as per customer schedule
• Packaging Details: As per Standard ARPL packing

Single Strip seal elastomeric joint (Movement up to 80mm). Single strip expansion joint consist of two edge beams with anchorages and with elastomeric sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical single strip seal joint is shown in the figure below.

Reinforced Elastomeric Slab Seal Expansion Joints (Movement up to 40mm to 330mm)

This type of joint consists of reinforced elastomeric pads connected to a supporting steel structure which itself is cast into the concrete structure of the bridge. The joint accommodates movements by width. Typical reinforced elastomeric joint is shown in the figure below.

Functions of Elastomeric Joints

• Should permit the expansion/contraction of the span/spans to which it is fixed with out causing any distress or vibration to the structure, Cause no inconvenience/hazard to the road user and offer good riding comfort, Should be capable of with standing the traffic loads including dynamic effects, Surface exposed to traffic should be skid free and resstant to polishing, Ensure accessibility for inspections and easy maintenance with all parts vulnerable to wear being easily replaceable

• Production Capacity: 100 Meters
• Delivery Time: 8 days
• Packaging Details: Standard ARPL packing

Elastomeric Bridge Bearing Pads are much easier to install in bridge than compared to other types of bearing used and required nil maintenance unlike most another elastomer, rubber undergoes no marked stiffening at low temperature when the thermal contraction of the bridge deck is at the maximum such stiffening could be deleterious to bearing and/or structure.

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing a premium quality gamut of Bridge Strip Seal Expansion Joint.

The technically advanced and dependable Expansion Joint Systems offered by us meet the demands of our most discerning clients. Our team of qualified engineers and architects makes use of advanced and sophisticated software to design the blueprints for all projects. Their designing skills enable us to reconstruct and build various buildings, which include residential and commercial structures. Further, our prolong expertise lead us to offer our clients with superior Armour Polyethylene Foam Sheets Backup Rods.We make use of quality material in the construction process, which is procured from trusted vendors.

In POT-PTFE bearing, two most important synthetic materials i.e. Elastomer & PTFE are utilized. Elastomer has an excellent property of providing translation and rotation without any moving parts. In POT-PTFE bearing, the latter part is utilized by completely encasing the elastomer pad in steel casing or POT. PTFE has an excellent property of having very low coefficient of friction and in the free end, a sliding component is added on top of POT, comprising stainless steel and PTFE for translation. The rotation, therefore, is provided by elastomer due to differential compression and translation by steel and PTFE.

Strip Seal Expansion Joint are the most frequently employed types of expansion joints in road bridges. By special steel welding elements arranged side by side and equally controlled they are supported on special load carrying and control systems, intermediate sealing elements with form- and force-fit clamping as well as marked by a continuous anchorage in the structure with permanent connection to seal and coating.

Single strip expansion joint consist of two edge beams with anchorage and with elastomeric sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system.

• Production Capacity: 5000
• Delivery Time: as per customer schedule
• Packaging Details: As per standard ARPL Specifications

Bridge expansion joints are what allow the concrete to naturally expand and contract without cracking. The rubber expansion joints are placed at the end of a bridge where it meets up with the freeway. These connectors give the concrete just enough space to move and avoid concrete cracks.Bridges made of concrete will expand and contract a bit for many different reasons. That includes ice, settlement, shrinkage of the concrete, temperature changes, and even the weight of vehicles.

• Production Capacity: 50
• Delivery Time: 8 days
• Packaging Details: As per standard ARPL packing

We are engaged in manufacturing superior quality Compression Seal Expansion Joint.Ameenji Rubber Private Limited is a leading manufacturer and exporter of Expansion Joints, Rubber Sheet, Bearing Pads, Pot Bearings, etc. The company has an experience of three decades, employee strength of more than 200, is equipped with state-of-the-art manufacturing machinery and material testing laboratory; and a 40,000 sq. ft. plant and headquarters in Hyderabad, Telangana. 

• Item Code: 72161000
• Production Capacity: 500 Meters
• Delivery Time: 8 days
• Packaging Details: Standard ARPL Packing

This type of joint consists of reinforced elastomeric pads connected to a supporting steel structure which itself is cast into the concrete structure of the bridge. The joint accommodates movements by width. 

Functions:

• Should permit the expansion/contraction of the span/spans to which it is fixed with out causing any distress or vibration to the structure
• Cause no inconvenience/hazard to the road user and offer good riding comfort
• Should be capable of with standing the traffic loads including dynamic effects
• Surface exposed to traffic should be skid free and resstant to polishing
• Ensure accessibility for inspections and easy maintenance with all parts vulnerable to wear being easily replaceable

Movement: 40 to 300 mm

• Production Capacity: 50 meters
• Delivery Time: 8 days
• Packaging Details: Standard ARPL packing

We are engaged in offering  Slab Seal Expansion Joint For Bridge    product to our clients. Our range of this products is widely appreciated by our clients

Rubber expansion joint is a flexible connector fabricated of natural and/or synthetic elastomers and fabric, if necessary, internal metallic reinforcements designed to provide stress relief in piping systems due to thermal movements and mechanical vibration.

Metal expansion joints (also called compensators) are compensating elements for thermal expansion and relative movement in pipelines, containers and machines. They consist of one or more metal bellows, connectors at both ends, and tie rods that depend on the application.

Metal expansion joints (also called compensators) are compensating elements for thermal expansion and relative movement in pipelines, containers and machines. They consist of one or more metal bellows, connectors at both ends, and tie rods that depend on the application.

We are engaged in offering Slab Seal Expansion Joint to our clients. Our range of all products is widely appreciated by our clients.