Approx. Rs 0.41 / Cubic CentimeterGet Latest Price
Elastomeric Bridge Bearing Pads
|Dimension||20 x 20 inch|
|Tensile Strength||17 MPa|
are much easier to install in bridge than compared to other types of bearing used and required nil maintenance unlike most another elastomer, rubber undergoes no marked stiffening at low temperature when the thermal contraction of the bridge deck is at the maximum such stiffening could be deleterious to bearing and/or structure.Applications:
Laminated elastomeric bearing or neoprene bridge bearing pads are simple to install as contrast with different sorts of bearings deployed and demand zero handling. Dissimilar to numerous elastomer, neoprene rubber experiences no marked contraction at least temperatures when bridge neck thermal contraction is performed at optimum; as such contraction can be harmful to structure and bearing. Suitably compounded and precisely outlined bearings can be anticipated to work productively for minimum 15 years.
As utilitarian bearings for sell beams, pre-stressed concrete or pre-cast concrete in buildings and bridge are imperative, our elastomeric bridge bearings allow uniform and smooth transfer to load through beam to the frame as well as permit beam revolution for bearings because of beam deflection under load. These also permit longitudinal and lateral beam movement that is induced by heat pressures. They do not possess any movable components. In addition, thermal contraction and expansion are assimilated by ability of pad to offer and take shear. No sliding movement between pad and abutment or between pad and beam is present.Benefits:
Our bridge deck are composed of numerous elastomeric material laminates that is separated through steel supports. The complete bearing size and laminate thickness is as per demand of transferred load. Bearings possessing steel plates are supported should be compresses or cast vulcanizes or molded as one unit in mold below heat and pressure.